ESP MAG816 Dokumentacja Pobierz pdf (Strona 20)

20 MAG816 - Installation and Operation Manual

Figure 26. Example for Instant Action Mode Programming.

5.4 Master Panel Mode

When connecting two MAG816 panels in a common system, the rst must be pro-

grammed as Master and the second as Slave.

In order to program the Master Panel mode:

• Set a jumper on the Master position of the main module - Figure 10.

• Press

to introduce changes.

The connection between the Master Panel and the MR8 module relays is described in

item 4.1, and the connection between the Master Panel and the Slave - in item 4.2.

5.5 Repeater Panel Mode

In order to program the Repeater Panel mode:

• Set a jumper on the Slave position of the main panel module - Figure 10.

• Press

to introduce changes.

The connection between the Master Panel and the Slave is described in item 4.2.

5.6 Single Panel Mode

No jumper is set on the Master or Slave position in Single Panel Mode of the MAG816.

In order to program the Single Panel mode:

• Check whether there are jumpers set on the Master or Slave position. Remove them

if any.

• Press

to introduce changes.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Brak uwag

ESP MAG816 Dokumentacja Strona 20