ESP MAG816 Dokumentacja Pobierz pdf (Strona 23)

MAG816 - Installation and Operation Manual 23

6.5 Sound Signal

• Short beeps - After pressing the and upon the initial start-up of the panel

• Continuous beep - Fire and/ or Fault status. The signal can be stopped by pressing the

button, but the LED indication remains.

• Interrupted beep - After pressing the

button to enable/disable zones/sound-

ers and the

button to access “One Man” test mode of zones. The signal can

be stopped by pressing the

button, but the LED indication remains.

6.6 Service Modes

Zone Enable / Disable

Each zone of MAG816 can be enabled or disabled.

To disable a zone:

• Press

button: DISABLE/ ENABLE LED blinks.

The ZONE 1 LED blinks in yellow (2 blinks

per second) if ZONE 1 is enabled and

lights permanently if ZONE 1 is disabled.

• Press

button, until you reach

the zone which has to be disabled: The respective zone LED blinks in yellow

(2 blinks per second).

• Press

button: The LED of the disabled zone lights

permanently in yellow.

• Press

button: That will run the procedure for initial

start-up of the panel (item 6.1).

At this point the zone is disabled.

To enable a zone:

• Press

button: DISABLE/ ENABLE LED blinks.

The ZONE 1 LED blinks in yellow (2 blinks

per second) if ZONE 1 is enabled and

lights permanently if ZONE 1 is disabled.

• Press

button until you reach

the disabled zone: The LED of the disabled zone lights

permanently in yellow.

• Press

button: The zone LED will start blinking in yellow

(2 blinks per second).

• Press

button: That will initialize the start-up procedure

and introduce the changes (item 6.1).

At this point the zone is enabled.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

ESP MAG816 Dokumentacja Strona 23

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa ESP MAG816