ESP MAG816 Dokumentacja Pobierz pdf (Strona 7)

MAG816 - Installation and Operation Manual 7

3.1 Wall Mounting

• Use the template supplied to determine

the openings of the metal bottom onto the

wall - Figure 4.

• Drill Ø6-8mm diameter openings in the

wall and x the box using the provided

anchors and screws (Positions 2 and 4,

page 31) - Figure 5.

Figure 4. Figure 5.

3.2 Flush Mounting (option)

The accessory set provided contains two special hangers for ushed wall mounting

(position 20, page 31) of the re alarm panel on 25 mm thick drywall.

• Use the dimension shown in Figure 6 to draw and cut out the mounting openings in

the drywall.

• Attach the hangers to the internal side of the wall and x them with the screws (Position

19, page 31), as shown in Figure 7, Position 1.

• Run all external cables in the box and then place it into the mounting opening. Fix the

bottom using the mounting screws and washers (Positions 17 and 18, page 31) - Figure

7, Position 2.

Figure 6. Figure 7.

WASHER

METAL BOX

25mm THICK

DRYWALL

SCREWS FOR

FLUSH MOUNTING

SCREWS FOR

HANGER FIXING

HANGER

TEMPLATE

DRILL HERE

FLUSH MOUNTING

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Brak uwag

ESP MAG816 Dokumentacja Strona 7